Can machines catch a cold? So the problem comes, the winter is coming, with the temperature decreasing, people's clothes are thicker, the purpose is to keep warm and prevent colds, then these machinery will be afraid of cold "cold"?
The answer is yes: yes, as long as the construction location is wrapped by cold air in the environment, the machinery will be afraid of cold, and then easy to "catch a cold", to our rotary drilling rig as an example: the day is cold, there will often be no car, white smoke after the car, hydraulic pump abnormal sound, oil leakage in each position and so on.
Today, we will not analyze these failures and their causes, but mainly share how to prevent these failures and maintenance precautions when the temperature is low. What do you need to pay attention to in operation and maintenance when using rotary drilling rig in cold season? First, preheat start
1. Before starting the rotary excavator at low temperature, check the engine oil and antifreeze;
2, start the engine, the key door after the power, such as the preheating light off after the ignition;
3. After the engine is on fire, idle for 10 to 15 minutes to preheat the engine;
2. Maintenance and use
The winter maintenance of rotary drilling RIGS is similar to that of ordinary diesel vehicles.
1, to replace 10 -30 diesel (this depends on the region where the rotary drilling rig is located, if in the more northerly region, you need to add more diesel);
2. To replace the diesel filter, the oil should be replaced with the locally applicable thickening machine oil, the oil filter should also be replaced, the hydraulic system should be replaced in time where there is oil leakage, and the conditional fuel tank should be insulated.
3, to carefully check whether the heat dissipation system hose aging and fracture, if there is a problem should be replaced in time, because these places are more prone to problems in winter.










