1) Wide range of milling and digging: Up to 25-40m3 / h (depending on the density and fragmentation of the rock) in moderately hard rocks (such as weathered rocks and tuff), kitchens with small amounts of concrete can also be made without rebar, and by using a galvanizing machine connected to a 300 ton excavator, Concrete can be easily buttered with steel bars up to 30mm in diameter.
2) Low vibration and noise: It is an effective alternative to cracking work and is environmentally friendly in areas affected by vibration and noise, such as around old buildings and hospitals.
3) Precise control of construction: the outline of the structure can be quickly and accurately adjusted, and it can be applied in tunnel excavation, which can not only solve the defect problem that troubles the person in charge of the construction company, but also solve the problem of "Ning south" of the construction company, which can reduce the cost increase due to the problem.
4) The material collected by iron has a small particle size and is uniform, and can be used directly as a filler.
5) Excellent safety: Metal drilling machines can be used to eliminate the front hand workers, rather than artificially drilling holes in soft rock and gravel layers. The danger of excavation greatly improves the safety of tunnel construction.
6) The structure is simple and easy to use: it can be connected to any existing hydraulic excavator, it can be connected using a hydraulic circuit with a hydraulic crushing hammer or a hydraulic jig, and a separate excavator has been purchased on the user side.






